Classification

Model No.

Capability

Conductive Ink, Carbon

For Flexible Printed Circuit

(Membrane Switch)

ED 423SS

For painting on non-high temperature resist material.

PF-414

For painting on soft membrane switch circuit.

JEF-225

For mixed with ED427SS to achieve right conductive.

JEH-103

For soft blend circuit.

Conductive Ink, Carbon

For Rigid PCB

PR-800

Double carbon density, for use on hard circuit board, Circuit jumper and protects copper wires, etc.

Conductive Ink, Silver

For Flexible Printed Circuit

(Membrane Switch)

ED 427SS

For painting on membrane switch, good for non-high temperature resist parts. Production temperature can be adjusted.

ED 478SS

For soft blend circuit printing. Production temperature can be adjusted.

ED 725A

For soft blend circuit printing. Production temperature can be adjusted.

PF-410

For soft blend circuit, durable for rubbing, good hardness, good for cross over circuit.

Conductive Ink, Silver

For Rigid PCB and Plating Industry (touch-up & repair)

ED 976SSHV

Silver jumper can eliminate an extra copper lamination layer.
Excellent adhesion to PWB copper and phenolic. Excellent conductivity. Withstands thermal cycling and solder.

Classification

Model No.

Capability

Dielectric Ink (Insulation)

For Protection of Flexible Printed Circuits (Membrane Switch)

ED 6024SS

For use without UV device. Protect and insulate large grounding area of soft circuit printing and membrane switch. Low production temperature for non-high temperature resist parts.

JEH-116G - Green

For use without UV device. Protect and insulate large grounding area of soft circuit printing and membrane switch. Production temperature can be adjusted or Infrared can be use. Good attach on ITO film and catalyst can be use for accelate the process.

JEH-118C - Milky White

For use without UV device. Protect and insulate large grounding area of soft circuit printing and membrane switch. Production temperature can be adjusted or Infrared can be use. Good attach on ITO film and catalyst can be use for accelate the process.

ED 451SS

For use with UV device, good for cross over, however the thickness of the ink should be 20 to 25 micron. Suitable for protect and insulate the soft circuit.

ED 452SS

For use with UV device, good for cross over and spacer between two layers. Excellent insulated. Suitable for protect and insulate the soft circuit.

ML 25198

For use with UV device, good for cross over, however the thickness of the ink should be 20 to 25 micron. Suitable for protect and insulate the soft circuit.

ED 1015

For insulation of cross over and normal soft circuits. Use with 725A, 702D and 726A conductive ink.

Specially for making spacer

JEF-400

Special for spacer between two layers. Replacement of traditonal film method. Cost effective.