什么是 Prosave?


是一种残胶少、可再剥离的粘着型工业用保护膜。可以长期保持稳定的粘性和耐热性。其表面经过防静电处理,能有效防止剥离时的静电以及吸附灰尘等现象。该保护膜采用各种厚度的基材,并且使用剥离力度不同的粘着剂,可根据用途和需要选择使用。

Product Application(应用范围): PROSAVE(Industrial Use Protection Film)(工业用保护膜)
Model / Type (种类) Model No.(型号) Base Film(基材)(PET) Pressure Sensitive Adhesive (粘着层) Liner(离型膜)(PET) Adhesion Strength -(PET)(粘着力 对PET) Anti-Static(防静电)
(Ω/□)
Features(特点)
Low Tack (微粘着) 75LS 75μm 7μm 25μm 0.07 N/25mm Re-Adherable, Anti-static(再剥离 防静电)
「EP」 50LS 50μm 7μm 25μm 0.07 N/25mm Re-Adherable, Anti-static(再剥离 防静电)
25LS 5μm 7μm 25μm 0.07 N/25mm Re-Adherable, Anti-static(再剥离 防静电)
75MS 75μm 10μm 25μm 0.19 N/25mm Mid-Low Tack, Re-Adherable, Antistatic(再剥离 防静电)
Adhesion stronger than LS(粘着力比LS强)
Low Tack/Heat resistance(耐热微粘着) 25THS 25μm 2.5μm 25μm 0.07 N/25mm 2.28×109 Re-Adherable, Anti-Static(再剥离 防静电)
「RC」 Heat Resistance(耐热性)
UV Deactivating(UV易剥离) 100UV 100μm 25μm 25μm 17 N/25mm UV deactivates adhesion(UV易剥离)
「UV」 After UV exposure 0.1N/25mm or less(紫外线照射后为)(0.1N/25mm以下) High-tack before UV exposure(初期强粘着力)
Low Tack(微粘着) 12CBTS 12μm .5μm 25μm 1.2 N/25mm 9.5×109 Re-Adherable, Anti-static(再剥离 防静电)
「CB」 25CBTS 25μm 2.5μm 25μm 0.3 N/25mm 9.5×109 Re-Adherable, Anti-static(再剥离 防静电)
50CBTS 50μm 2.5μm 25μm 0.3 N/25mm 9.5×109 Re-Adherable, Anti-static(再剥离 防静电)
25CBFS 25μm 2.5μm 25μm 0.6 N/25mm 9.5×109 Re-Adherable, Anti-static(再剥离 防静电)
Self Adhering(自动吸附) 50SQ 50μm 20μm 25μm 0.01 N/25mm 1.21×1010 Self Adhering, Anti-static(自动吸附 防静电)
「SQ」 50SQD 50μm 20μm 50μm 0.01 N/25mm 1.21×1010 Self Adhering, Anti-static(自动吸附 防静电)
※The table shows typical test results and does not guarantee material value. 以上均为测定值,而非保证值。



AdhesionForce(粘着力):
Object(粘附体) SUS(不锈钢) PET(聚酯) Glass(玻璃) Acrylic Board(丙烯板) LSE/BC Side(面) Copper Foil(铜箔)
EP(75LS) 0.02 0.07 0.05 0.06 0.03
EP(75MS) 0.11 0.19 0.17 0.23 0.08
RC(25THS) Initial(初期) 0.04 Initial(初期) 0.07 Initial (初期) 0.06
After Heated(加热后) 0.09 After Heated(加热后) 0.11 After Heated (加热后) 0.10
UV(100UV) Initial(初期) 28 Initial(初期) 17 Initial(初期) 29 Initial (初期) 24
After UV (UV照射后)<0.1 After UV (UV照射后)<0.1 After UV (UV照射后)<0.1 After UV (UV照射后)<0.1
12CBTS 0.5 1.2
25CBTS 0.2 0.3
50CBTS 0.2 0.3
25CBFS 0.3 0.6



Object(粘附体) PROSAVE 50SQ/50SQD
PET (聚酯膜) Acrylic Board(丙烯板) Glass(玻璃)
23℃/50%RH 0.01 0.01 0.02
60℃/90%RH 0.01 0.02 0.05
80℃ 0.01 0.01 0.05
-20℃ 0.01 0.01 0.02
※Adhesion Unit (粘着力单位为):N/25mm。
※Peel from Prosave side at 300m/min, 180°angle (薄膜粘着面以300mm/min 180°的条件剥离时的测定值。)
※LSE is one of KIMOTO Diffusion Film on BC side is Back Coat side. (LSE为本公司扩散膜的产品名称,BC为背面。)
※RC(25THS) After 150°C/30min Test result (RC(25THS)加热后粘着力是在150℃・30分加热条件下所测定的数值)。
※UV(100UV) UV Exposure 400mJ/cm2 (UV照射量为400mJ/cm2)
※The table shows typical test results and does not guarantee material value(所有的数值皆为样品测定值,而非保证值。)



Adhesive Transfer (残胶测试):
Object(粘附体) 50SQ/50SQD
PET(聚酯膜) Acrylic Board (丙烯板) Glass(玻璃)
23℃/50%RH
60℃/90%RH
80℃
-20℃
○…No Adhesive Residue (表示无残胶)
※Visual Inspection after 250hours (250hr后目测结果)



Chemical Resistance(耐酸碱性)
Dipping Prosave SQ applied with PET(与PET贴合后浸泡) Dipping Prosave SQ Only(单独浸泡)
Prosave SQ Other Brqand (其他同类产品) Prosave SQ Other Brand (其他同类产品)
5 min(分钟) 1 Hr(小时) 5 min(分钟) 1 Hr(小时) 5 min(分钟) 1 Hr(小时) min(分钟) 1 Hr(小时)
10%HCI
5%NaOH
Ethanol (乙醇) × ×
Ethyl Acetate (醋酸乙基) × × ×
Hexane (乙烷)
MEK × × ×
Toulene (甲苯) × × × ×
Benzine (汽油)
Water (水)
※○…No Degradation(无侵蚀现象)
※△…Minor Degradation on the edges(边缘部位有侵蚀现象)
※×…AdhesiveDe-lamination(粘着层发生脱落现象)